01 saturn sc2, must see a negative?

Home / the12volt's Install Bay / Car Security and Convenience / 01 saturn sc2, must see a negative? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ncollicott

Member - Posts: 5

Joined: December 07, 2009

Location: Wisconsin, United States

Posted: December 07, 2009 at 7:26 PM / IP Logged

im installing a remote car starter and all went well but my service light is on??? it says keysense wire must see a (-)negative during remote start to keep service light from coming on. what does this mean exactly. do i really tap a negative ground wire into this wire or what? thanks alot guys

Back to Top

ncollicott

Member - Posts: 5

Joined: December 07, 2009

Location: Wisconsin, United States

Posted: December 07, 2009 at 7:27 PM / IP Logged

01 saturn sc2

Back to Top

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: December 07, 2009 at 8:11 PM / IP Logged

yup use a relay and give it , negative ignition....its a saturn thing.

Back to Top

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: December 07, 2009 at 10:45 PM / IP Logged

If you tell us what kind of remote starter is installed, we should be able to tell you which output to use.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: December 08, 2009 at 3:45 AM / IP Logged

Any decent R/S should have a wire labelled GWR, or ground whilst activated (or running). If this is being used for another function, such as a by-pass, branch off, diode in line (1N 4004) with the band towards the alarm and for safeties sake run to 85 on relay, constant 12v+ at 2amp fused to 86, good ground to 30 and 87 to key-sense wire.

Back to Top

ncollicott

Member - Posts: 5

Joined: December 07, 2009

Location: Wisconsin, United States

Posted: December 08, 2009 at 7:59 AM / IP Logged

its a bulldog security remote starter. moder RS82. i installed it and all went well it starts perfect. its just the service and security light are on. how do i install a relay to this wire?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

01 saturn sc2, must see a negative?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.