07 santa fe remote start trigger

Home / the12volt's Install Bay / Car Security and Convenience / 07 santa fe remote start trigger (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dnapier

Member - Posts: 3

Joined: October 01, 2004

Location: Maryland, United States

Posted: December 24, 2009 at 6:34 AM / IP Logged

Almost finished with an install of a remote start on a 2007 Hyundai Santa Fe integrated with the factory keyless entry system. The R/S unit is a Crimestopper RS-901 add-on unit (same as the RS-900 w/o keyless entry). Just have two questions:

Do I need to use the dis-arm/re-arm features of the R/S?

What is the best trigger for the remote start since the door locks will only pulse one time without lock-unlock-lock? I can use single or three pulse input.

Thanks!

Back to Top

i am an idiot

Platinum - Posts: 13,670

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: December 24, 2009 at 7:35 AM / IP Logged

I do not have time to draw you a diagram right now. You could use 2 diodes and use lock, unlock, lock to trigger the unit. Someone will explain for you if needed. I will do it this evening if nobody has anything for you today.

Also you need to make sure your keyless entry will still work with the vehicle running. Key in ignition and vehicle running, can you unlock the doors with the factory keyfob?

Back to Top

dnapier

Member - Posts: 3

Joined: October 01, 2004

Location: Maryland, United States

Posted: December 24, 2009 at 9:10 AM / IP Logged

I solved the problem with the keyfob by using relays to kill the ignition feeds to the BCM, seems to work great. I'm familiar with the lock, unlock, lock with diodes but I was hoping to use only the lock feature. Anyone had any luck using the factory alarm horn output as a trigger?

Back to Top

chev104275

Gold - Posts: 1,427

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: December 24, 2009 at 10:23 AM / IP Logged

why not use the lock motor wire ?

If i Can't Install it I Don't need it Joe

Back to Top

dnapier

Member - Posts: 3

Joined: October 01, 2004

Location: Maryland, United States

Posted: December 24, 2009 at 10:27 AM / IP Logged

The problem with using the lock motor wire is that the factory K/E system will only pulse the door locks one time during the lock sequence regardless of how many times you push the button. As mentioned earlier, I can use the lock, unlock, lock method but I would like to avoid that on this vehicle if possible.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

07 santa fe remote start trigger

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.