2001 honda accord, idatalink

Home / the12volt's Install Bay / Car Security and Convenience / 2001 honda accord, idatalink (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

lake207

Member - Posts: 16

Joined: May 18, 2009

Location: Illinois, United States

Posted: December 25, 2009 at 1:16 AM / IP Logged

i have 2001 Honda accord from Canada, and i am trying to install IDATALINK ADS-TB-HA the diagram said pink wire from IDATALINK go to pin5 green wire but there is no green wire pin 5 do not have any wire. i did find blue and red wire but no green wire.plzzzz can anybody help me!!!!

http://www.idatalink.com/search/index/model/721

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: December 25, 2009 at 8:23 AM / IP Logged

your reading it wrong.

Data is RED pin 2

Synchro is BLUE pin 3

btw pink comming off the ADS is connected to ignition at key barrel. Ignition is YELLOW/BLACK pin 1

these wires are found in a 5 pin CONNECTOR that is GREEN @ the key barrel.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

lake207

Member - Posts: 16

Joined: May 18, 2009

Location: Illinois, United States

Posted: December 25, 2009 at 10:09 AM / IP Logged

how do i program it?

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: December 25, 2009 at 1:00 PM / IP Logged

i assume your running it w2w and not d2d?

if so just plug in the 3pin wiring plug, press and release program button for either method you choose. 1 falsh is for d2d and 2 flashes for w2w.

i am reviewing this from memory, so i might be off but you have the insatllation manual, so you should look it up.

1) Place key in ignition barrel only. plug in connectors and hold programming button until led stays on

2) Turn key to IGNITION (2 clicks)

3) LED will turn off, wait as it will turn back on solid for 4 seconds or so

4) LED turns off, remove key and try to remote start

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

lake207

Member - Posts: 16

Joined: May 18, 2009

Location: Illinois, United States

Posted: December 25, 2009 at 9:09 PM / IP Logged

i did install all of the wires as it show in the diagram but no luck.this car is from Canada i don't know if that make any different?

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: December 25, 2009 at 9:45 PM / IP Logged

no differance here. the wires are the same colour in the NA regions. Whats the problem your having? not being able to program it or not being able to wire it up properly?

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

lake207

Member - Posts: 16

Joined: May 18, 2009

Location: Illinois, United States

Posted: December 25, 2009 at 10:33 PM / IP Logged

hey thank you very much for helping me i really appreciate that. and yes did got it working.but now i need to know what color is rear Defroster Output wire?? and were is located at??? according to my diagram shows a BROWN / yellow at the switch.

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: December 26, 2009 at 7:04 AM / IP Logged

i have it as BROWN / yellow (-) latched trigger @ switch. what you want to do is take the status output or ground when running from your alarm/rs, and wire it up to a relay just incase it draws more than 250mA.

85 - ground when running (status output)

86 - constant 12v

87 - high current ground ie chassis

30 - to BROWN / yellow defrost wire @ switch.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 honda accord, idatalink

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.