2006 gmc canyon

Home / the12volt's Install Bay / Car Security and Convenience / 2006 gmc canyon (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

doug.b

Member - Posts: 18

Joined: December 29, 2004

Location: Canada

Posted: December 25, 2009 at 9:59 PM / IP Logged

i installed a prostart 3310 with a IDatalink ADS DLSL GM Bypass connected through R232 data port on the remote start. When I try to start the truck it powers up everything but it wont try to crank the engine also the door locks wont work . I have followed the program procedure for the bypass and tried another bypass and it wont wok. any suggestions

doug.b

Back to Top

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: December 25, 2009 at 10:37 PM / IP Logged

disconnect the rs232 data port and connect everything wire-to-wire. On that note, the default of the data port is for xpresskits, not ads modules or fortin. if you want, you need to go into programming and change it.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Back to Top

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: December 26, 2009 at 9:55 PM / IP Logged

what firmware is on the bypass

how did you program the bypass

when you program for the GM cars you need to follow very carefully and do exactly what it says, if it doesn't work the first time try again it may take a few times to get it right

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 gmc canyon

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.