dlpkgm to cntl heated seat automatically?

Home / the12volt's Install Bay / Car Security and Convenience / dlpkgm to cntl heated seat automatically? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

duramax3586

Member - Posts: 5

Joined: December 26, 2009

Location: Colorado, United States

Posted: January 03, 2010 at 3:37 PM / IP Logged

Ive read on xpresskit.com that the dlpkgm will control the heated seats if the engine temperature is below 32*. Does this happy automatically through the info wire on the obd2 connector? Or do I need to set something up?

I have it installed on a 2006 GMC Sierra

I tried searching, didnt find any info. Thanks for your help.

Back to Top

monty_77

Copper - Posts: 491

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 15, 2009

Location: North Dakota, United States

Posted: January 04, 2010 at 9:58 AM / IP Logged

it will turn on after remote starting if the engine is below 32F or 0C it will be on low setting to nothing to program.

and yes it will turn on by the data wire obd 2

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dlpkgm to cntl heated seat automatically?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.