dodge ram remote start issue

Home / the12volt's Install Bay / Car Security and Convenience / dodge ram remote start issue (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dksob81

Member - Posts: 31

Joined: February 17, 2007

Location: United States

Posted: January 14, 2010 at 7:33 PM / IP Logged

I am having a problem with the remote starter on a 99 Dodge Ram 2500 auto, I have everything connected including keyless entry (no alarm). The problem is if the doors are locked with the factory remote, when you remote start the factlry alarm goes off. I have the DISARM wired correctly with a relay and 1.5k ohm resistor.

Back to Top

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: January 15, 2010 at 1:06 AM / IP Logged

what diagram did you look at that said you needed a relay and resistor

in the harness coming from the door there should be a negative lt. GREEN/ orange wire in there, wire up factory disarm to this and you should be fine

Back to Top

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: January 15, 2010 at 1:42 AM / IP Logged

05gt wrote:

what diagram did you look at that said you needed a relay and resistor

in the harness coming from the door there should be a negative lt. GREEN/ orange wire in there, wire up factory disarm to this and you should be fine

x2. that's what my info shows

Back to Top

dksob81

Member - Posts: 31

Joined: February 17, 2007

Location: United States

Posted: January 15, 2010 at 6:41 AM / IP Logged

So i don't need the resistor or relay?

bulldog security says to use a relay and a 1500 ohm resistor.

Connect the resistor to pin 87, then to the LIGHT GREEN/ ORANGE wire in the harness running to the drivers door.

Pin 30 is ground,

Pin 85 is FASD wire from unit

Pin 86 is 12v constant

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 15, 2010 at 10:09 PM / IP Logged

If you have the proper resistance on the PROPER wire, then what you will need to do is set the remote start to unlock before start and lock after start.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dodge ram remote start issue

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.