2002 gmc sierra ultra start 72 series

Home / the12volt's Install Bay / Car Security and Convenience / 2002 gmc sierra ultra start 72 series (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

southsidehacker

Member - Posts: 2

Joined: January 19, 2010

Location: Manitoba, Canada

Posted: January 20, 2010 at 11:11 AM / IP Logged

Before I start the install on a 2002 gmc sierra I'd like to clarify a few things, i'm using the fortin passlock sl-2 for a bypass module. I've read and heard mixed reviews about using the data-link harness between the remote start and bypass module. Some people say to use it others suggest not to re compatibility issues. How are these normally installed and wired? Also for the door locks, since they are a (+) trigger,is using the outputs from the remote start with a relay to reverse polarity the way this is normally done. I'd like the remote start remote start to function as the factory keyless entry remote does.

Thanks in Advance

Search for other posts by southsidehacker

kreg357

Platinum - Posts: 7,787

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: January 20, 2010 at 7:52 PM / IP Logged

The Ultra Start 1272 only outputs (-) for lock / unlock. You will have to change the polarity for your trucks positive locks. You will need 2 relays fused at 10 amps. Here is a basic diagram: https://www.the12volt.com/doorlocks/page3.asp#3wp

As for the data harness to the Fortin, I would cut it and just connect the red wire to 12 volts. One less thing to worry about.

I recently did a 2003 Silverado. Fairly easy. The ignition & passlock wires are in the steering column and most of the rest are in the BCM, just below the steering column.

Soldering is fun!

southsidehacker

Member - Posts: 2

Joined: January 19, 2010

Location: Manitoba, Canada

Posted: January 21, 2010 at 12:01 PM / IP Logged

figured it out last night, didn't use the datalink, and used a relay to reverse polarity

thanks

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2002 gmc sierra ultra start 72 series

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.