Clutch Wire for Acura Integra 1990

Home / the12volt's Install Bay / Car Security and Convenience / Clutch Wire for Acura Integra 1990 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Acura

Member - Posts: 1

Joined: June 08, 2002

Location: United States

Posted: June 08, 2002 at 10:04 PM / IP Logged

Which color wire is it and where is it located? I also heard that its probably white but I will check. Thank You.

Back to Top

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: June 08, 2002 at 10:10 PM / IP Logged

I don't know what the wire colors would be.

On the clutch pedal, there should be two plugs, each with two wires. One disables the starter, the other disables the cruise control. Unplug one of them, step on the clutch, and try to start the car--if it won't start, those are the wires you need.

I assume you're doing a remote start install. Be careful and make sure no one gets run over.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clutch Wire for Acura Integra 1990

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.