the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2010 ford explorer door pin


Post ReplyPost New Topic
< Prev Topic Next Topic >
scooobi02 
Member - Posts: 1
Member spacespace
Joined: February 02, 2010
Location: Indiana, United States
Posted: February 02, 2010 at 1:25 PM / IP Logged  

Looking for help with a 2010 Explorer finding the door pin. I have tapped onto every Yellow/Gray wire down there and nothing seems to work. I have one set of wiring instructions that say it is a Positive Trigger, but none of those wires rest at 12V when the door is open. When I test for negative, none of them go to power either, using both a probe and meter.  Does anyone have any information on this?? I would greatly appreciate it. Everything else is done with the Remote Start/ Alarm but the door trigger.

Thanks!!

monty_77 
Copper - Posts: 491
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 15, 2009
Location: North Dakota, United States
Posted: February 05, 2010 at 10:30 AM / IP Logged  
my notes say its a
GREEN/ purple for the drivers door
Green for the driver rear door
white for the passenger door
yellow for the passenger rear door
gray/orange for trunk pin
all are located in the drivers running board or the SJB connector B(located high in the drivers kick panel)
dd pin 17
dr pin 20
pd pin 19
pr pin 21
tp pin 28
all are an open circuit
if you need help with a wiring diagram for that pm me and i will send you the one i got
05gt 
Silver - Posts: 628
Silver spacespace
Joined: October 30, 2005
Location: British Columbia, Canada
Posted: February 05, 2010 at 10:37 PM / IP Logged  
you will need to add 2 diodes to each doorpin wire to get this to work
monty_77 
Copper - Posts: 491
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 15, 2009
Location: North Dakota, United States
Posted: February 05, 2010 at 10:40 PM / IP Logged  
also have to put positive through 10k ohm resistors in the diagram i got on the second diode for the trigger wire

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 26, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer