comp ft6000as

Home / the12volt's Install Bay / Car Security and Convenience / comp ft6000as (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

timelessr1

Member - Posts: 18

Joined: April 23, 2008

Location: New Jersey, United States

Posted: February 05, 2010 at 8:06 PM / IP Logged

I got my alarm installed professionally since i dont have the time anymore to do it myself (also since its freezing here, and i dont have a heated garage) I got a Compustar FT6000AS installed in my 2010 ford f150. It seems that everything is working perfectly, except one thing. The Passive arming. When i try to activate passive arming (buttons 2+3 fo .5 secs) the remote reads "FAIL" where the time is normally stated. I called the installer, and at first he didnt know why this was doing it, and said, he has to connect to the brain and diagnose. Now this will be the third time i have to bring my car back. He also said that he talked to firsttech and they said that this was a setting that he had to set. Is this true? I would like to know the real answer before I have to drive another 50mins each way to "try" something that might not even be the case.

timelessr1

Member - Posts: 18

Joined: April 23, 2008

Location: New Jersey, United States

Posted: February 05, 2010 at 8:24 PM / IP Logged

Oh, also a Blade-AL interface is being used for the install

enice

Silver - Posts: 857

Joined: March 05, 2006

Location: New York, United States

Posted: February 05, 2010 at 9:16 PM / IP Logged

It is option 1-08 setting 2.

timelessr1

Member - Posts: 18

Joined: April 23, 2008

Location: New Jersey, United States

Posted: February 06, 2010 at 9:02 AM / IP Logged

enice wrote:

It is option 1-08 setting 2.

Option 1-08 setting two i thought just allows the alarm to passively arm AND NOT passively lock. I want the system to do both. lock and arm, and thatwhen the remote is saying FAIL. I didnt think it was a feature the installer has to turn on.

enice

Silver - Posts: 857

Joined: March 05, 2006

Location: New York, United States

Posted: February 07, 2010 at 12:30 AM / IP Logged

We are compustar dealers and there are 3 settings...off, passive arming with locking, and passive arming without locking. That needs to be on, thats why it gives you the fail message.

dswift

Copper - Posts: 396

Joined: March 12, 2007

Location: United States

Posted: February 08, 2010 at 6:53 PM / IP Logged

roger that 1-08-2 will allow the remote to use that feature. Word is like bondo.

"dont ground out!"

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

comp ft6000as

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.