clifford auto arms while driving

i just bought a truck with a Concept 100 system. I can hit the unlock button and start the vechicle then drive away. After 60 seconds the alarm led starts flashing and the vibration sensor triggers the system which starts giving warning chirps. After several chirps the alarm goes off and lights flash unless I hit the unlock button on the remote. When the led starts flashing I can hit the unlock button which unlocks the doors then buys me another 60 seconds, again all while in motion. Any ideas? The unit has Auto-Arming capability but while the vehicle is moving? Please advise and thanks in advance.

looks like the system is in passive lock mode.

it ha rpm controlled door locks but it shouldnt arm while driving.

maybe howie can chime in. hes the clifford and euro know it all man.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

The alarm isn't getting it's ignition feed.

I will check that first, thanks for the reply.

howie ll wrote: The alarm isn't getting it's ignition feed.

I thought that was obvious! LOL

commit your way to jehovah and he will act in your behalf. psalms 37:5

Yes t&t, it might be to you and me.

Thanks Howie, you were absolutely correct. And t&t, for what it is worth, not everyone here is an installer. There are some obvious fixes in my area of expertise but I don't LOL when someone asks a question that is elementary to me, I try to help them. Again Howie, thanks!

I apologise mr newrobone! It wasn't directed at you, it was simply humour intended for my friend howard!commit your way to jehovah and he will act in your behalf. psalms 37:5

Ah such cynicism in one so young! Glad to see the problem's solved and sorry about our humour.

No worries, you guys are the experts here therefore I will take my lashings like a good rookie! Thanks for the knowledge.