viper 211hv prelude

I'm trying to install a Viper 211hv keyless entry on my 1997 Prelude. I have the following wires going to the following places. Red (12v constant)- straight to battery Blue (-200 mA Second unlock output) - no where BLACK/ White-1 (Input of domelight supervision relay #87) - no where BLACK/ white (output of domelight supervision relay #30) - no where GREEN/ black (lock #30 common output) - BLACK/ white wire WHITE/ black (lock #87 normally closed) - no where violet/black (lock #87 normally open input) - grounded blue/black (unlock #30 common output) - blue/orange wire violet (unlock #87 normally open input) - grounded white (+/- parking light flash output) - no where black (ground) - grounded brown (- horn honk output) - no where lightGREEN/ black (factory alarm disarm) - no where WHITE/ blue (- 200mA channel 3 validity output) - no where yellow (+ switched ignition input accessory) - no where orange (- 500mA ground when armed output) - no where BROWN / black (unlock #87a normally closed) - no where RED / white (- output of channel 2) - no where My problem is that it will unlock the doors fine, but not lock them. When I press the lock button I can hear the builtin relay fire, the led starts blinking to tell me its armed but the doors never lock. Any help?

t&t tech wrote: Did you verify with a meter that you have the correct lock trigger wire?

Just did. When I lock the doors that wire goes from 12v to 0v then back to 12v. Same as unlock wire when I unlock the doors. Also I swapped the wires around and it would lock (with the unlock button) but not lock (with the unlock button). I'm lost.

tehjrow wrote: t&t tech wrote: Did you verify with a meter that you have the correct lock trigger wire? Just did. When I lock the doors that wire goes from 12v to 0v then back to 12v. Same as unlock wire when I unlock the doors. Also I swapped the wires around and it would lock (with the unlock button) but not lock (with the unlock button). I'm lost.

This is what i meant to say: Just did. When I lock the doors that wire goes from 12v to 0v then back to 12v. Same as unlock wire when I unlock the doors. Also I swapped the wires around and it would lock (with the unlock button) but not UNLOCK (with the LOCK button). I'm lost.

Then the problem is with the ouptut of the unit! You stated that the violet and violet/black which are common at the holder has been grounded, so there should be signal on both wires when the respcective functions are initiated, check the output of the GREEN/ black with a meter for a ground pulse during lock activation, if you don't get any, you have a faulty unit!commit your way to jehovah and he will act in your behalf. psalms 37:5

Also make sure the harness has been inserted properly and all connections are proper!commit your way to jehovah and he will act in your behalf. psalms 37:5

t&t tech wrote: Then the problem is with the ouptut of the unit! You stated that the violet and violet/black which are common at the holder has been grounded, so there should be signal on both wires when the respcective functions are initiated, check the output of the GREEN/ black with a meter for a ground pulse during lock activation, if you don't get any, you have a faulty unit!

Sorry i'm kinda new. How do I check for a ground pulse? Use it as a ground and connect the other side to a 12v and press the button?

Yup! Connect the red lead to a constant twelve and connect the black lead to the GREEN/ black of the unit, when you lock the voltage should spike to twelve or there about and drop back to zero! If this doesn't happen the unit is faulty!commit your way to jehovah and he will act in your behalf. psalms 37:5

HAHA I feel so stupid, I figured it out. Apparently there IS a difference between GREEN and LIGHT GREEN. That will teach me to install things at 3am. Thanks for the troubleshooting tips, I wouldn't have found it otherwise!

I put a viper 211hv keyless entry in my prelude. The range is pretty short (like less than 20 feet). Can I extend the crappy little antenna wire up to the windshield and it work better?