reset avital 4103?

Home / the12volt's Install Bay / Car Security and Convenience / reset avital 4103? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

toby12188

Copper - Posts: 57

Joined: July 21, 2004

Location: Arkansas, United States

Posted: April 15, 2010 at 9:23 PM / IP Logged

Hey guys I was trying to change some settings on an Avital 4103 (remote start and keyless) and i've messed something up. One remote works correctly but on the other remote if i want to start the vehicle, i've got to hit (one after the other) start, lock, unlock- before the vehicle starts. Simply pressing the start button on the remote doesn't do anything. Is there any way I can reset this thing to factory settings?

http://www.directeddealers.com/manuals/IG/Avital/N4103_2008-07_web.pdf

(link to install guide)

I tried the steps on page 29/30 to 'reset features' but that doesn't really do anything. I've thought about doing the steps to deleting the remotes and re-learning them, but there's a sentence in the guide that says "it is not possible to teach a remote control to the system more than once." Does this mean that if I delete the remotes that I have that they will never work with it again? Does anyone know what to do to get it back to normal? I really have no clue what I did to get it this way. Any thoughts are appreciated!

I didn't do it. *nodnod*

Back to Top

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: April 16, 2010 at 12:31 PM / IP Logged

If it was me, I would try to relearn the remote that is acting funny. If that didn't do anything I would reset to factory defaults, then delete all remotes, and then relearn the remotes to the system. But that is me.

On my Viper 571xv, Viper 5301LE, and Viper 5701LE I have deleted all remotes and then have relearned the same remotes to those systems with no problems. The reason I did that was to remove the One Way remote and add only Two Way remotes.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Back to Top

toby12188

Copper - Posts: 57

Joined: July 21, 2004

Location: Arkansas, United States

Posted: April 17, 2010 at 5:00 PM / IP Logged

I deleted the remotes and re-learned them and it worked! Thanks a ton

I didn't do it. *nodnod*

Back to Top

smokeman1

Platinum - Posts: 1,588

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: April 17, 2010 at 8:05 PM / IP Logged

You are welcome. Glad to hear that worked out for you.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

reset avital 4103?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.