trunk release autopage rf 425

Hi i have installed in my honda civic 2001 CP an Autopage RF-425 and yesterday i bought the trunk latch from a honda accord 2000 and i installed to my trunk, and this latch it is also electrical and i want to connect it to my alarm. the trunk latch came with a Mitsuba RC-2201 relay. it has 4 pins. and i don't actually know how to connect it. can anyone help me? or should i buy a different relay?.

Are there any markings on this relay? The easiest way is to attach a live and ground from a 12volt source, attach the pos then touch each of the other three terminals in turn. when the relay clicks you have 86 and 85, the other two will be 87 and 30. Constant 12volts at 15amp fused to 86 and 87, trunk release aux from alarm to 85, also if there is a switch, ground to switch then output also to 85. Note: place a 1N4004 diode in line, on both of those wires, band away from relay.

so its gonna be to wires with a fuse of 15A connected to 12v constant. now the wire from the trunk latch it is gonna be connected to the Aux of the alarm and then to the 85 in the relay? what is the function of the 30 then? ground or what am i gonna do with that?

desk0 wrote: so its gonna be to wires with a fuse of 15A connected to 12v constant. now the wire from the trunk latch it is gonna be connected to the Aux of the alarm and then to the 85 in the relay? what is the function of the 30 then? ground or what am i gonna do with that?

at beginning was "so it is gonna be TWO wires"

I left it out, sorry 30 is your output to the trunk release actuator, it's grounded at the actuator.