viper 5301, 99 solara

Hello everyone. i recently picked up viper 5301 remote start and i am a little confused with the 8 pin connector. now i did look around and tried to do my homework. my main question is with the flex relay. ok this is what i know, vehicle is a 99 solara v6 with added toyota vip which has been removed. H3/1 pink - white H3/2 RED / white- (Confused) h3/3 Orange -blue/red H3/4Violet - red H3/5 Red- white H3/6 pink/white - (Confused) H3/7 Pink/Black- (Confused) H3/8 RED / Black- white im am kinda lost on the flex relay, can anyone help me out on how i should wire this for my vehicle? and maybe help on what colored wires to hook them up to... thanks for ALL your help

my real question is, does my vehicle need the flex relay? thanks

I don't believe you would need a flex Relay

H3/-2, H3-5, H3-8 to constant 12 volts  White or WHITE/ Red

H3-4 to Starter  ...RED

H3-1 to Ignition 1...BLACK / YELLOW

H3-6 to Ignition 2...RED / Black

H3-3 to Accessory... Blue/Red

H3-7  Not used

Some info on tech tip #1077   https://www.the12volt.com/installbay/forum_posts.asp?tid=105518&get=last

https://www.the12volt.com/installbay/forum_posts.asp?tid=113760&get=last

Test ALL wires to verify what they are.   Good Luck

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

thanks alot smoke