2010 mazda b2300

Home / the12volt's Install Bay / Car Security and Convenience / 2010 mazda b2300 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

zatzy

Member - Posts: 2

Joined: November 10, 2009

Location: British Columbia, Canada

Posted: October 14, 2010 at 7:14 PM / IP Logged

I did a remote start on a 5 speed 2010 mazda B2300 truck. The problem I am having now is that after about 5 minutes of the truck sitting it kicks itself out of reservation mode. I believe it is because the factory ECU sends a pulse to the door trigger wires which the remote start see's as the door opening. is there any other way to work around that without putting your own door trigger in? I am using a Compustar remote start (cm5200 brain). any ideas would be great thx.

Back to Top

i am an idiot

Platinum - Posts: 13,670

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: October 14, 2010 at 7:35 PM / IP Logged

Does that remote start unit time out at 5 minutes? Disconnect the door trigger wire and make a way to ground it to trick the remote start unit into thinking you went through the procedure. Does it still die after 5 minutes?

Back to Top

zatzy

Member - Posts: 2

Joined: November 10, 2009

Location: British Columbia, Canada

Posted: October 15, 2010 at 1:39 PM / IP Logged

Ya it works fine once you dont use the factory door triggers. I just dont want to install our own door triggers as there is not a whole lot of space to do so. would like to try to find another solution if possible

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2010 mazda b2300

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.