2008 land rover lr2 viper 5701 install

Hi, This is my first go round with installing a Viper system in a vehicle. I've done some remote starters in the past (AudioVox) but this is my first encounter doing a full security and remote start system. I have a couple of questions in regards to the Viper/Xpresskit D2D connections. I have the following components: Viper 5701 Security and Remote Starter XpressKit KILRV Immobilizer Bypass XpressKit DLPK CANBUS Doorlock interface I've read the instructions cover to cover and I understand the basic wiring setup as far as connections to the vehicle. My question is about the D2D interface between devices. I want to know if I hook up the D2D between the various components do I also need to hook up the individual wire to wire connections. For instance in the DLPK manual it indicates the following connections to the security system: WHITE/ Red - Trunk Trigger Violet/White - Tach Blue/White - Running Status Light green - Lock Pink - Ignition Green - Door Trigger Blue - Unlock RED / White -Trunk Pop But if i am using the harness that came with the KILRV it looks like I can connect all 3 devices to D2D and I assume that means I can leave off the Wire to wire connections. Am I correct in that assumption or not? Thanks! JFeezie

::BUMP:: Anyone? I really need some advice here.