python 991, xk01, 05 2500 avalanche acc 2

Home / the12volt's Install Bay / Car Security and Convenience / python 991, xk01, 05 2500 avalanche acc 2 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

scottmt

Member - Posts: 2

Joined: December 17, 2010

Location: Montana, United States

Posted: December 19, 2010 at 10:24 PM / IP Logged

I installed the 991 with the XK01 Interface module on an 05 2500 Avalanche. Everything works great after the install. My question is on the Acc 2 wire. I have the wire but the installation manual didn't cover which wire on the 991 to connect to. This is what I've tracked down as the reason the heated seats won't start when it cold out. Unless there is something in the programming of the XK01 that I overlooked.

Thanks

Scott

scottmt

Member - Posts: 2

Joined: December 17, 2010

Location: Montana, United States

Posted: December 20, 2010 at 12:25 AM / IP Logged

The unit must not have been cold enough for it to start everything. When done with work tonight it had started drivers seat and rear defrost. Thank you for looking.

Thanks

Scott

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

python 991, xk01, 05 2500 avalanche acc 2

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.