the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

sonic sensor honda


Post ReplyPost New Topic
< Prev Topic Next Topic >
condorosa 
Member - Posts: 2
Member spacespace
Joined: January 02, 2011
Location: Namibia
Posted: January 02, 2011 at 6:55 AM / IP Logged  
Hi
would like to install a sonic sensor or equivalent on a 2008 honda civic vxi with an existing factory installed alarm / immobilizer system.
any advice & wiring / circuit diagrams would be appreciated.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 02, 2011 at 7:56 AM / IP Logged  
You would have to integrate it with the trunk/hatch trigger via diodes,you have to find the factory unit and test to find the right wire, or go to the trunk hatch light and pick up from there.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 20, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer