06 corolla s rs viper 5301 w/ canmax400

I did the same setup with the Viper 5301 and Canmax400dei on my 08 TL S and works great, now trying to do it on my 06 Corolla S. I think I got most of the wiring, but am unsure about a few things. First question is what information is available on the can bus data network, brake status/door trigger/etc? I need the color of the wire which is for the auto light, located at light switch in the steering column. Also if someone could verify the color for the door lock/unlock Primary harness (H1), 12-pin connector, WIRE COLOR H1/2, RED, (+)12v CONSTANT INPUT----------------------------------------------H3/5

H1/3, BROWN, (-) HORN OUTPUT-------------------------------------------------GREEN/ YELLOW

H1/5, BLACK, (-) CHASSIS GROUND------------------------------------------------GROUND

H1/6, VIOLET, (+) DOOR TRIGGER INPUT*---------------------------------------NOT SURE IF I NEED TO CONNECT

H1/8, GREEN, (-) DOOR TRIGGER INPUT*----------------------------------------NOT SURE IF I NEED TO CONNECT

H1/11, WHITE, PARKING LIGHT OUTPUT ----------------------------------------GREEN / WHITE

Auxiliary harness (H2), 18-pin connector,

H2/9, VIOLET/WHITE, TACHOMETER INPUT-------------------------------------VIPER HAS VIRTUAL TACH

H2/18, BLACK/ WHITE, (-) NEUTRAL SAFETY SWITCH INPUT-----------------GROUND

Heavy gauge remote start, (H3) 8-pin connector, WIRE COLOR

H3/1, PINK, IGNITION 1 INPUT/OUTPUT----------------------------------------- BLACK/ WHITE

H3/2, RED / WHITE, (+) FUSED (30A) IGNITION 2 -------------------------------H3/5

H3/3, ORANGE, ACCESSORY OUTPUT---------------------------------------------BLUE/RED

H3/4, VIOLET, STARTER OUTPUT---------------------------------------------------RED

H3/5, RED, (+) FUSED (30A) IGNITION 1 INPUT---------------------------------WHITE

H3/6, PINK/WHITE, (+) IGNITION 2 -----------------------------------------------BLACK / YELLOW

H3/8, RED / BLACK, (+) FUSED (30A) ACCESSORY/STARTER INPUT---------H3/5

Door lock harness, 3-pin connector,

WIRE 1, BLUE, (-) 500mA UNLOCK OUTPUT------------------------------------BLUE OR BLUE / YELLOW [NOT SURE/WIRE COLOR]

WIRE 3, GREEN, (-) 500mA LOCK OUTPUT--------------------------------------BLUE/WHITE OR GREEN [SAME AS ABOVE]

CANMAX400DEI

WIRE 05, BLACK/ WHITE, KEYSENSE----------------------------------------------BLUE/BLACK

WIRE 13, YELLOW/BLACK, CODE--------------------------------------------------BLUE

WIRE 14, VIOLET/WHITE, TXCT----------------------------------------------------GREEN

WIRE 16, GREY, AUTO LIGHT (RIGHT SIDE)-------------------------------------NOT SURE

WIRE 20, GREY/BLACK, AUTO LIGHT (LEFT SIDE)-----------------------------NOT SURE

Lock - Green (-)

Unlock - Blue / YELLOW (-) DP

Meter wires while turning key in driver door key cylinder.

**advanced mecp certified

Thanks, any ideas about my other questions?