door lock and unlock failure

Home / the12volt's Install Bay / Car Security and Convenience / door lock and unlock failure (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

bwiener

Member - Posts: 15

Joined: January 19, 2011

Location: Illinois, United States

Posted: January 23, 2011 at 9:12 AM / IP Logged

the remote start went well except doors dont lock or unlock wired to unlock violet/gray and lock gray / YELLOW in kick panel anyone have idea 2008 mercury mountaineer premier

wiener20

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: January 23, 2011 at 10:00 AM / IP Logged

What unit are you using? Have you tested your wires to verify?

bwiener

Member - Posts: 15

Joined: January 19, 2011

Location: Illinois, United States

Posted: January 23, 2011 at 10:15 AM / IP Logged

installed code alarm ca5051 locks were my last hook everything else verified with wiring info did not verify im supposed to be hooked between door locks and before relay polarity - maybe ill pull door lock assy from door trim and check wires

wiener20

monty_77

Copper - Posts: 491

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 15, 2009

Location: North Dakota, United States

Posted: January 23, 2011 at 10:19 AM / IP Logged

if you have negative outputs from the Remote starter directly to the wires, they may not be strong enough negative signal.

You may have to add relays to make a stronger ground.

bwiener

Member - Posts: 15

Joined: January 19, 2011

Location: Illinois, United States

Posted: January 23, 2011 at 10:34 AM / IP Logged

uncharted water for me explain relay hook ups thanks for info

wiener20

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: January 23, 2011 at 10:37 AM / IP Logged

Before we go into that you need to verify you have the right trigger wires

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 23, 2011 at 10:40 AM / IP Logged

Hence TEST

bwiener

Member - Posts: 15

Joined: January 19, 2011

Location: Illinois, United States

Posted: January 23, 2011 at 11:10 AM / IP Logged

thanks dor everyones quick resposnse maybe laziness on my last hook hopefully but not today bears-pack party

wiener20

cmk0808ny

Copper - Posts: 203

Joined: June 02, 2007

Posted: January 24, 2011 at 5:11 PM / IP Logged

the truck has slam lock-

to turn off

turn ign on press unlock door switch 3x

turn off ign

press unlock door switch 3x

turn ign back on- car honks

press lock then lock again and it will turn it off

turn car off

also need to put diodes in the unlock and lock wire to prevent battery drain.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 24, 2011 at 5:31 PM / IP Logged

ER could someone explain the last post? Also diodes to prevent battery drain... wth.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.