compustar cm5000

Home / the12volt's Install Bay / Car Security and Convenience / compustar cm5000 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

AlucardXP

Member - Posts: 1

Joined: December 14, 2004

Posted: February 03, 2011 at 9:50 PM / IP Logged

Ok, Im currently installing a Compustar alarm in my car and ive hit an issue. Ive got everything hooked up right but when I went to connect the green wire to the ignition wire, I heard the brain click. I noticed when I put my key into the ignition, the key chime was going off like the key was already in the ignition position. I took the Green wire down and when its disconnected, its reading 12v already. Im pretty sure that it shouldnt be throwing 12volts on its own like that. Does anyone have any suggestions why it could be doing this?

monty_77

Copper - Posts: 491

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 15, 2009

Location: North Dakota, United States

Posted: February 03, 2011 at 10:45 PM / IP Logged

did you hook up the ground first.

or check your ground might not be a good one

what vehicle is it in?

what bypass did you use?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

compustar cm5000

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.