2008 ford super duty alarm/remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2008 ford super duty alarm/remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

cglenn

Member - Posts: 13

Joined: July 23, 2003

Posted: March 08, 2011 at 6:56 PM / IP Logged

2008 ford super duty alarm/remote start -- posted image.

Ford "Gold" Alarm/Remote Start Help needed

I understand that these units have two(2) auxillary outputs to be commanded by the buttons one(1) and two(2) respectively from the six button remote. Currently Ford has my number one(1) output connected to the headlamps which is what I wanted. The number two(2) output doesn't appear to be connected to anything. Has anyone or does anyone know how to connect this auxillary output to control the powerscope mirror fold command ? That would be AWESOME.

I have ZERO paperwork from the alarm/remote install so I have no way of consulting the instruction manual and unfortunately I cannot seem to locate one. Even then I don't know that that alone would suffice as I would still need to trace and locate the "trigger" wire for the fold command.

ALL help would be greatly appreciated.

Craig

2008 F250 FX4 Super Duty

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: March 08, 2011 at 11:56 PM / IP Logged

hi,

for the alarm/remote start look here: http://www.fordaccessoriesstore.com/GfaWeb/techSpecs.do

select Installation Instructions, then Electronics, then

Remote Start/ Vehicle Security Systems-Truck.

You can then pull up the info for your model year. other vehicles, such as the Expedition/Navigator have optional features. memory seats, power liftgate, rear defroster to name a few.

The module programming instructions are also available.

As for the power mirror fold, check the gray/brown at the mirror switch.

should be a ground signal.

mark

cglenn

Member - Posts: 13

Joined: July 23, 2003

Posted: March 09, 2011 at 5:21 PM / IP Logged

thanks going to download and give it a try.

craig

cglenn

Member - Posts: 13

Joined: July 23, 2003

Posted: March 09, 2011 at 6:37 PM / IP Logged

found the instruction and found the trigger wire for the "options" such as power lift gate and/or rear defroster which are supposed to be ground trigger wire. My issue is that pressing the aux2 button on my remote gives NO output at all. Is there some programming required to enable aux2 output ?

cglenn

Member - Posts: 13

Joined: July 23, 2003

Posted: March 21, 2011 at 6:48 PM / IP Logged

Still needing some help !!!!

cglenn

Member - Posts: 13

Joined: July 23, 2003

Posted: April 11, 2011 at 10:40 AM / IP Logged

someone ? anyone ? Surely someone knows how to overcome this ?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2008 ford super duty alarm/remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.