dome light with prostart problem

07 Honda Fit GD. (AT)

installed prostart ct 3200..everything works fine..

cept that i need a bypass..for now i just tape the chip around the key ring.......

problem is that

when i remote start my car, my factory remote "lock and unlock" dont work +

only works when i use the prostart remote to unlock it , it works, and the dome lights dont come on when i unlock it,

is there a wire i need to tap? inorder for the lights to work with the prostart remote??

cuz i'll only know if my car is unlock if i see my var light up from far...

m i missing a wire or sth??

buy yourself a bypass and do it properly.

the pkall or fortin honda-sl3 is the cheapest bypass solutions available. Idatalink has good ones too but cost a tad more.

under remote start, the keyless entry system (honda) will no longer work, this is normal. As far as the dome light, you will need to use the courtesy lightutput from the prostart (dome light supervision)  and connect that to the domelight wire in the car. use a relay.

however, i never had an issue with domelights going on when unlocking for the japanese cars.

oh ok..

thanks...cuz im in china right now...

so i cant really find bypass kits...well atleast i duno where to search...

thanks

i'll rewire them later

its like this.,

when car is off.....

remote unlock - lights come on ...normal.

remote start then press unlock- lights dont come on...

i want my lights to come on even when the car is on remote start.