2011 ford fusion, dei 504k to factory

Home / the12volt's Install Bay / Car Security and Convenience / 2011 ford fusion, dei 504k to factory (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

je3169

Copper - Posts: 73

Joined: July 14, 2005

Location: Ohio, United States

Posted: July 23, 2011 at 9:03 AM / IP Logged

Hey all I have a 2011 ford fusion and am installing a DEI 504K shock sensor to the factory alarm. I will be taping into the hood pin for the trigger and a constant for power I read on here somewhere that I could go to the ignition with the ground that way when the car was in the run position it would turn the shock sensor off

and when the car was in the off position it would go to ground is that right and do I need any diodes for this any help would be great.

Thanks John

Back to Top

tonanzith

Gold - Posts: 593

This member consistently provides reliable information

Joined: July 18, 2008

Location: Washington, United States

Posted: July 23, 2011 at 10:13 AM / IP Logged

If it is a true ignition i.e. TEST the wire with a meter then yes you could do that and definitely use a diode.

Gary Sather

Back to Top

je3169

Copper - Posts: 73

Joined: July 14, 2005

Location: Ohio, United States

Posted: July 23, 2011 at 10:35 AM / IP Logged

Thanks for the reply

John

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2011 ford fusion, dei 504k to factory

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.