2010 suburban remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2010 suburban remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

paul h

Copper - Posts: 109

Joined: December 06, 2006

Location: Texas, United States

Posted: August 06, 2011 at 2:33 PM / IP Logged

Got a 2010 Suburban and looking to put a RS on it. Can't seem to figure out the right module.

Fortins site shows the CAN-SL2 will work by itself (I think) but also shows the EVO-ALL, EVO-CAN & CAN-SL-PL but says these 3 have to be teamed with the TB-GM2 module.

Can anybody confirm what the best route is or would be for this? Its a basic subruban but would like to use a the feature to pop the rear gate as the factory remote does now...but the factory start stuff is crap.

Thanks in advance for the help!!

Back to Top

tonanzith

Gold - Posts: 593

This member consistently provides reliable information

Joined: July 18, 2008

Location: Washington, United States

Posted: August 06, 2011 at 10:05 PM / IP Logged

Go to www.xpresskit.com

You should use Directeds DBALL

Gary Sather

Back to Top

paul h

Copper - Posts: 109

Joined: December 06, 2006

Location: Texas, United States

Posted: August 08, 2011 at 5:08 PM / IP Logged

The DB-ALL would be ok too....

Anyone here sell them or recommend best place to get one? It would be SOO much easier to get one already programed rather than me buy another programmer I'm stuck with for 1 module....

Any other ideas? Thanks

Back to Top

tonanzith

Gold - Posts: 593

Joined: July 18, 2008

Location: Washington, United States

Posted: August 08, 2011 at 5:14 PM / IP Logged

th db all should come flashed with the correct firmware you just need to program it to the vehicles key/immobilizer system which needs no extra parts. Programming instructions come with it and you could pick one up at your local car stereo shop or best buy or online from xpresskit.com

Gary Sather

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2010 suburban remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.