ct 5472 tw remote car starter

2010 dodge grand caravan, purchased the remote starter kit from crappy tire, installed as per directions with a fortin evo chr and t harness for dodge. The system worked great with one remote controller, start,stop door lock and unlock but could not program the two way remote, could not program it according as per the instructions. So foolishly I said lets reset the remote starter control box and start over. Now we can't program any remote controller by the hood switch, key on then off procedure. any help please.

After many days I found the problem, there is a yellow wire (ignition) from the Fortin bypass unit that wasn't connected to the yellow wire (ignition) on the 6 pin connector of the prostart, autostart ct-5472 tw unit. I had this wire connected at first, then programed one remote, then after a test or two the car started remotely ok so I removed the yellow wire figuring I didn't need it. Now comes the programing of the second remote, the two way the lcd display which didn't happen. Hence the reason for the post on Aug 18. I will sleep good tonight don't have to take this unit back. Thanks to all that read my post.