compustar 1wam4r starting problem

Home / the12volt's Install Bay / Car Security and Convenience / compustar 1wam4r starting problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

spectacle

Member - Posts: 1

Joined: October 30, 2011

Location: Manitoba, Canada

Posted: October 30, 2011 at 10:11 PM / IP Logged

Hi everyone,

I know this topic was posted awhile back and Ironically by a member (chrisheg60) from the same country and province as I'm in, but I've just encountered almost a similiar problem with my compustar remote start.

I have a 2004 Dodge Grand Caravan and everything has been working fine (4 years and counting) up until tonight when I decided to test the command start for the wife since the snow and cold weather is gonna fly here quite soon. Vehicle starts fine with the key, but when trying to start with the remote start, the vehicle will attempt to start then die. It attempts this 3 times then shuts down. I've read through the other topic and tried resetting the tach by pushing the black button at the back of the brain when at an idle, checked the hood pin and all lights on the vehicle work fine, even disconnected the battery.

One thing (actually 2) things I'm seeing is that the theft light is flashing when trying to remote start it, as well as I'm getting an obd code of p0513 on my odometer after I tried to reprogram the remote.

Any suggestions and thanks in advance for any help.

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: October 31, 2011 at 5:10 PM / IP Logged

if the theft light is flashing..your bypass module isn't working.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

compustar 1wam4r starting problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.