remote start, 2005 toyota corolla

i am new at installing remote starters, i put a remote start on a 05 corolla, i used an excalibur rs-330-edpb and used the blade al.  the remote start worked good but i could not get the door locks to work with the remote start key pad.  the stock key pad worked for the door locks,  but it didnt work when i started the car with the remote starter.  also the car ran a little rough when i put it in gear im not sure if that was from the remote start or if the car was cold it has 125,000 miles on it.  thanks for any help.Doug

The Factory FOB's Unlock not working while the engine is running is normal.Soldering is fun!

Could have used a blade tb and saved the some $. The al on that car does nothing extra

yeah i just used the blade al because they had it in another vehicle that they were selling so they wanted me to take it out of that vehicle and put it in the corolla.  but i cant get the door locks to work,  the remote start works fine.  im not sure if it has anything to do with child safety locks.  thanks for any help.Doug

Info from Audiovox and Omega :

Power Unlock  BLUE / YELLOW  (-)  DRIVER KICK  Pin6 in White 10 Pin connector PowerLock  GREEN ( or Blue/White ) & WHITE  (-)  DRIVER KICK  White 10 Pin Plug ( White is Child Door Locks )

http://www.wiringinstructions.com/v2/diagrams200/209%20-%20Child%20Safety%20Door%20Locks%20with%20AU-FD%20and%20DLS.pdf

Soldering is fun!

W2W on the door locks, no big deal. Do you need key sense during the R/S to make the factory fobs work?

blue-yellow unblock green lock connect this wires you will never have a problem.

driver kick panel white plug lock - GREEN (-) unlock - BLUE / YELLOW(-)Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert