09 hyundai sonata 530t

Home / the12volt's Install Bay / Car Security and Convenience / 09 hyundai sonata 530t (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

cmercado

Member - Posts: 12

Joined: January 14, 2012

Location: Oregon, United States

Posted: January 14, 2012 at 4:19 PM / IP Logged

Hello every one. I was currently working on a 2009 Hyundai Sonata. I install a Viper 5902, smart start module, back-up battery (520T). I want to add the 530T window module into the system for the front windows. According to directechs it has Type A window systems and have the wiring to it too. The problem is that I can not figure out how to wire the system up. I have heard that it is not possible to add the 530T to this vehicle.

I was wondering if any one has had the chance to work with this vehicle and if there is any trick to adding the 530T to the system.

thank you

cmercado

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 14, 2012 at 4:38 PM / IP Logged

Why is it not possible? Just go to the motor wires in each door.

Type A is the most common, simply means that the motor wires rest at 0v.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 14, 2012 at 4:42 PM / IP Logged

The only other down side I can think of is if there are processors directly attached to the motors like a Mitsubishi Montero.

Back to Top

cmercado

Member - Posts: 12

Joined: January 14, 2012

Location: Oregon, United States

Posted: January 14, 2012 at 4:50 PM / IP Logged

Yeah. That's what I was told from another tech. That on some of these cars because of the auto window up/down it is necessary to go directly to the motor housing and get connections from there.

Have you heard of having to do that?

cmercado

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 14, 2012 at 4:54 PM / IP Logged

Yes Mitsubishi Gallant wires from processor to motor, if as I said the processor and motor are one with no external wiring between the two don't go any further!

Otherwise it's normal procedure to wire a 530t to each set of motor wires; read the instructions and you will see why.

Back to Top

cmercado

Member - Posts: 12

Joined: January 14, 2012

Location: Oregon, United States

Posted: January 14, 2012 at 5:01 PM / IP Logged

Yeah. Know why. I don't want gray hairs at an early age. I won't be going any further. I'm pretty sure that's how its laid out.

Thank sir, I appreciate the feed back.

cmercado

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

09 hyundai sonata 530t

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.