99 civic 50.5 unlock issue

having issues getting the alarm to unlock when disarming the alarm . the doors lock and everything else works perfect have had this issue for a while but i finally want to take care of this . I am confident i have the correct wires on both alarm and on the car . maybe im missing something but i just dont know .

Locks: Power Lock GREEN / WHITE   - keyless entry module Notes: The keyless entry module is white in color, and located in the drivers kick panel. Power Unlock GREEN/ orange   - keyless entry module Notes: The keyless entry module is white in color, and located in the drivers kick panel. Are those the wires you connected to for your lock/unlock? Did they test correctly? Are you getting a good ground signal out of the alarm?Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

select civics never had a keyless module at the kick panel, however the vehicle still had keyless as it was in a different location. if you dont have this module in the kick, you will see a green connector at the steering column. that green connector is taped to a black harness with a small blue tape indicator. if all else fails, grab the GREEN/ orange (-) unlock at the harness going into the door.Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Lock- green&white unlock-green$orange kick panel module. Or get this wires at the keyless entry module behind the radio green plug,this keyless entry module is part of the radio.

yes those are the colored wires im using . i do have the keyless entry module and the factory alarm plug does not have those colored wires on it . one thing i do need to mention is that i dont have the oem lock and unlock switch on the driver door hooked up . i dont know if that has anything to do with it or not . i think the grounds are good but i did combine them all and attached to the same spot i dont know if that would affect it working or not .