does my alarm have onboard lock relays?

ive searched everywhere and have a question i have a clifford matrix I alarm system and wondered if it had onboard lock relays see the thing is i have an s10 pickup with no factory door locks period and noticed that at one time 2 wire door actuators were installed and want to connect them directly to the alarm as arm/disarm without switches do i still need to wire up relays or can i wire the actuators directly to the blue and green wires frm the 2 pin harness on the brain it notes that the blue wire is (-)unlock (+) lock and green wire is (-)lock (+) unlock

If you read further in the description I am sure it states that is a low current circuit. Are the wires pretty small in thickness? You need a circuit that can handle 12-15 amps of current for actuators (up to 4). Play it safe put the relays in properly and nothing will get damaged that way. Relays are cheaper than a new brain unit! To master and control electricity is perfection. *evil laugh*

If it has two wires no, if 6 purple and PURPLE / black, BROWN / black, WHITE/ black blue/black and GREEN/ black then yes.

thanks got it all hooked up and workin except one issue my interior lights stay on ill have the doors closed and the lights still remain on...any ideas?

What car,make year and model? Stay on for how long? One minute?

96 chevy s10 and they stay on all the time pulled the fuse out meanwhile