viper 5704 with 516l

Hi, on the 516L voice module remote start input(H2/1), I need to connect that to the Viper 5704(H2/22)(-)200mA accessory output. The Viper(H2/22)is already hooked to a relay to drive my 2nd accessory wire for remote start in the vehicle. The relay coil draws 160mA, can I hook (H2/22)to the voice module(H2/1) without exceeding the 200mA of the Viper output with it driving the relay coil and voice module input? Thanks for the help...

It should but if your worried just use a relay wired like so: 85 to (-) acc. output, 86 to(+) 12v constant, 87 to chassis ground, diode each wire to 30.