Programming an Alpine Transmitter

Home / the12volt's Install Bay / Car Security and Convenience / Programming an Alpine Transmitter

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

megamegaman

Member - Posts: 1

Joined: December 02, 2012

Posted: December 02, 2012 at 10:25 AM / IP Logged

Hi,

I'd appreciate some help/direction on an Alpine SEC-100S/SEC-150R. The system came with two remote transmitters and I have been using one of them for a very long time. Never any problems.

Now I have the need to use the second one. I replaced the dead battery and the blue light comes on when the button is pressed on the remote transmitter, but it does not appear to be paired with the system as nothing happens.

How can I pair the remote with the system?

I found these instructions on the forum for Alpine Remotes, but it does not cover my model. Are they still valid? https://www.the12volt.com/installbay/file.asp?ID=471

Thanks,

MMM

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.