03 envoy r/s alarm combo avital 5103

Hello I am installing an Avital 5103 remote start alarm combo in my 03 envoy and was wondering if anyone had some suggestions on a bypass module kit I should use ? I have an expresskit pljx module but it doesn't look like it does door locks. I would like it to control door locks,windows, and rear defrost. I have researched the site but most of the posts on Envoys are kind of old. Looking for some updated info on the modules thanks.

Ads-blade all with the dl--gm1 firmware will do everything you want. You should bee able to buy it preloaded with the firmware. Check out idatalink.com also check ifar.ca for Fortin bypasses I've used them bothIf i Can't Install it    I Don't need it   Joe

The GMC Envoy is the sister vehicle to the Chevrolet Trailblazer.  Here is a Pictorial on the Trailblazer using one of the more popular bypass modules available :  https://www.the12volt.com/installbay/forum_posts.asp~TID~130514~PN~1Soldering is fun!

The ADS BLADE will not work with the avital product. Run an idatalink ADS AL CA flash with DL GM 1 firmware and will cover everything you want. I recommend wiring the bypass W2W with the remote start.

thanks again.

just curious why wouldn't the ads blade work with the avital if done w2w ?If i Can't Install it    I Don't need it   Joe

The Blade AL is a small cartridge that slides into a slot in the Compustar ( and some Excalibur ) remote start units.  It is the functional equivalent of the ADS AL-CA bypass module.

Here is a link to the Excalibur site for their info :  http://www.caralarm.com/Excal_2010/Excal_2010.html

Here is a picture of a Blade AL almost fully inserted into a Compustar CM5200

Soldering is fun!

Ahhh I've never used one always use the ads-al-ca     If i Can't Install it    I Don't need it   Joe