dome light / door triggers

Home / the12volt's Install Bay / Car Security and Convenience / dome light / door triggers (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

lazydurangomod

Member - Posts: 1

Joined: June 13, 2013

Location: United States

Posted: June 13, 2013 at 12:37 PM / IP Logged

'03 Dodge Durango Sport

My car already has dome light supervision, i wired the dome light wire from the alarm straight to it and it works fine, do i still have to add a relay?

I also think this might be setting off my alarm, because i wire all the door triggers with their own independent diode and the alarm still goes off after 1-5 minutes. I've tried setting my alarm to wait 60 seconds but still goes off.

Any ideas?

Search for other posts by lazydurangomod

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 13, 2013 at 12:42 PM / IP Logged

Remove the dome supervision wire, what's the point if the vehicle already has it?

No diagnostics on the alarm?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dome light / door triggers

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.