pke on 2011 dodge ram 1500

Home / the12volt's Install Bay / Car Security and Convenience / pke on 2011 dodge ram 1500 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

dbarenas

Member - Posts: 15

Joined: July 15, 2013

Location: New Jersey, United States

Posted: July 20, 2013 at 11:22 AM / IP Logged

could some one give me a ignition wiring diagram for 2011 dodge ram i would like toi install pke and usind dball as an immobilizer bay pass

dbarenas

Member - Posts: 15

Joined: July 15, 2013

Location: New Jersey, United States

Posted: July 20, 2013 at 4:55 PM / IP Logged

I would like to install a pke on 2011 dodge tam 1500 is it even possible i have a db all and i loke to use if as a bypass also the pke has a push button start i would appreciate if even just a wiring diagram for the ignition and acc i dont know where to tap the acc the way its working now is the db all is set up for remote start as soon as i send signal to the start wire it turns on i would like it to work as oem cause i need the ignition to be on to reset the oil change due error

dbarenas

Member - Posts: 15

Joined: July 15, 2013

Location: New Jersey, United States

Posted: July 22, 2013 at 11:34 AM / IP Logged

would someone help me please im trying to install apke with a push button start im using the db all right now its working but i would like to used it like oem first push acc second push ign third is start but with the db all just pust start it starts but i don't det the acc mode or ignition mode i only have the pke hook up is just to one ignition which db all asked for and the two mux its working like a remote start problem is if schedule maintenance light up i cant reset it without taking the whole cover up then put the keys and i can't listened to the radio without starting the car so would anyone help me please

offroadzj

Gold - Posts: 2,043

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: June 03, 2005

Location: New York, United States

Posted: July 22, 2013 at 1:11 PM / IP Logged

Are you putting your foot on the brake? You need to press the button without touching the brake in order to get ACC and IGN. This will most likely require connecting the PKE brake input directly to the brake switch (not through the DB-ALL)

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

dbarenas

Member - Posts: 15

Joined: July 15, 2013

Location: New Jersey, United States

Posted: July 22, 2013 at 3:23 PM / IP Logged

Db all brake switch wire is not even connected

dbarenas

Member - Posts: 15

Joined: July 15, 2013

Location: New Jersey, United States

Posted: July 22, 2013 at 3:26 PM / IP Logged

On db all brake wire is only output it type 1 wire 2 wire

dbarenas

Member - Posts: 15

Joined: July 15, 2013

Location: New Jersey, United States

Posted: July 22, 2013 at 3:30 PM / IP Logged

The pke brAke wire is on the brake switch and my foot is not on it i would like to know wher to tap the acc wire from the pke to the vehicle

offroadzj

Gold - Posts: 2,043

Joined: June 03, 2005

Location: New York, United States

Posted: July 22, 2013 at 4:27 PM / IP Logged

All new Chrysler vehicles have a mux ignition system... there is no simple 12 volt Accessory, Ignition, etc. They are combined with the use of resistors. There is no way (as far as I know) of integrating the PKE directly to the ignition circuit without the use of the DB-ALL module.

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

dbarenas

Member - Posts: 15

Joined: July 15, 2013

Location: New Jersey, United States

Posted: July 22, 2013 at 4:56 PM / IP Logged

So there is no way to get it to work like factory

offroadzj

Gold - Posts: 2,043

Joined: June 03, 2005

Location: New York, United States

Posted: July 23, 2013 at 6:07 AM / IP Logged

Not any way I can think of...

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.