2010 honda crosstour

Home / the12volt's Install Bay / Car Security and Convenience / 2010 honda crosstour (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ccaudio

Copper - Posts: 52

Joined: December 11, 2002

Location: Pennsylvania, United States

Posted: December 03, 2013 at 11:18 PM / IP Logged

Hello I am going to install a remote start in a 2010 honda crosstour. I have no problem installing them just wanted to know what is the best bypass module. She only has 1 key so I can't use a universal one. I don't have a computer just a smart phone so a dball won't work I guess. Amy other suggestions.

Back to Top

chev104275

Gold - Posts: 1,427

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: December 04, 2013 at 5:37 AM / IP Logged

If you have anyone close to you that deals in idatalink stuff I would get an ads-al-ca flashed with the DL-HA3 firmware. The module will take care of pretty much everything for you (locks,factory alarm, data immobilizer, etc.) Also it only requires one key for programming

If i Can't Install it I Don't need it Joe

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: December 04, 2013 at 8:30 AM / IP Logged

I'm a big fan of the iDatalink bypass modules, too. You can even look online for the ADS AL CA module from a seller that will flash with the correct DL-HA3 firmware prior to shipment. Here is a link to the install guide :

http://cdncontent2.idatalink.com/corporate/Content/Manuals/DL-HA3/ADS-AL(DL)-HA3-EN_20130909.pdf

There might be a viable alternative with the Fortin EVO-ALL. They, too, are a full function bypass module similar to the ADS AL CA. They come preloaded with the basic firmware and can be re-flashed with a specific firmware if needed. However, the EVO-ALL with the basic Ver 4.09 or Ver 4.18 firmware will work for your vehicle and should be easy to find. Here is a link to the install guide :

https://ifar.ca/download/12091/evo-all_honda_acura.rev-20131031.pdf

Soldering is fun!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2010 honda crosstour

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.