avital 5303 heavy gauge wiring colors

Home / the12volt's Install Bay / Car Security and Convenience / avital 5303 heavy gauge wiring colors (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

jnz1

Copper - Posts: 109

Joined: November 11, 2013

Location: Wisconsin, United States

Posted: February 19, 2014 at 5:38 PM / IP Logged

Has anyone else ran into the heavy gauge wiring not matching the instructions. It seems the first four wires match, but the last four are switched around. Mine are Purple, green, fused red, orange, Fused red, pink, fused red, pink/White

jnz1

Copper - Posts: 109

Joined: November 11, 2013

Location: Wisconsin, United States

Posted: February 19, 2014 at 5:56 PM / IP Logged

The instructions are showing a 7 pin plug and the plug provided has 8 pins

jnz1

Copper - Posts: 109

Joined: November 11, 2013

Location: Wisconsin, United States

Posted: February 20, 2014 at 3:31 AM / IP Logged

500m xcrs is printed on the relay box.

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: February 20, 2014 at 5:43 AM / IP Logged

What instructions are you referring to? Viper 571?, Avital?

I think you are asking about the heavy gauge harness. The 7 pin connector is the ribbon cable that goes from the remote start unit to the xcrs.

Compare the wiring diagrams from the Viper 571 and an Avital 5303. You will see there is a bit of wiring difference.

And I believe your 7th wire listed (fused red) is probably a fused RED / white.

The Viper 571 install manual is located in the downloads section of this site.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

jnz1

Copper - Posts: 109

Joined: November 11, 2013

Location: Wisconsin, United States

Posted: February 20, 2014 at 11:51 AM / IP Logged

It's the avital 5303. In the instructions it list the heavy gauge as a 7 pin. The wiring has 3 fused inputs vs the directions also shoeing two.

jnz1

Copper - Posts: 109

Joined: November 11, 2013

Location: Wisconsin, United States

Posted: February 20, 2014 at 2:43 PM / IP Logged

The 571 wiring matches the wiring I received with the avital 5303. Should I follow the directions for the 571?

jnz1

Copper - Posts: 109

Joined: November 11, 2013

Location: Wisconsin, United States

Posted: February 20, 2014 at 3:49 PM / IP Logged

avital 5303 heavy gauge wiring colors -- posted image.

Instructions from both the avital 5303 and the Viper 571

smokeman1

Platinum - Posts: 1,588

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: February 20, 2014 at 4:07 PM / IP Logged

You should follow the instructions for the system you have. HOWEVER, you need to have the correct parts/pieces. It would appear that you have the wrong harness.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

jnz1

Copper - Posts: 109

Joined: November 11, 2013

Location: Wisconsin, United States

Posted: February 20, 2014 at 4:18 PM / IP Logged

To finish I could probably switch a few of the wires around so I have the fused inputs in the right spot. Right?

smokeman1

Platinum - Posts: 1,588

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: February 20, 2014 at 6:56 PM / IP Logged

If you are confident with what you are doing.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.