the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2002 grand prix brake lights constant on


Post ReplyPost New Topic
< Prev Topic Next Topic >
geeteezee 
Member - Posts: 14
Member spacespace
Joined: December 22, 2014
Location: Ontario, Canada
Posted: January 08, 2015 at 1:39 PM / IP Logged  
I have installed a Prostart CT 3471TW along with Express Kit Pkalll. Car starts fine but the brake lights stay on with engine running or off with key removed. Checked the correct wire (orange) connected to white at the brake switch.
Any ideas?
chev104275 
Gold - Posts: 1,428
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: January 08, 2015 at 1:48 PM / IP Logged  
I would have to guess that either you knocked the brake switch out of adjustment or it went bad.   If you unplug the switch do the brake lights shut off ?    Also the car shouldn't remote start with the brake lights on so I would have to say you have the wrong wire.
If i Can't Install it    I Don't need it   Joe
geeteezee 
Member - Posts: 14
Member spacespace
Joined: December 22, 2014
Location: Ontario, Canada
Posted: January 08, 2015 at 1:54 PM / IP Logged  
Out of adjustment. It must have happened after the initial test. Works fine now and shuts down with brake applied.
Thanks for your help!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 17, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer