avital 5303 horn

Home / the12volt's Install Bay / Car Security and Convenience / avital 5303 horn (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

saetyler

Member - Posts: 3

Joined: January 07, 2015

Location: Washington, United States

Posted: January 11, 2015 at 3:07 PM / IP Logged

i have a avital 5303 on a 92 integra and i was wondering if i need a relay to install the horn output

Back to Top

chev104275

Gold - Posts: 1,427

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: January 11, 2015 at 4:29 PM / IP Logged

I've never done the car but I would say yes

HORN BLUE/RED (-) (High current, requires relay) @ STEERING COLUMN HARNESS

Pin 87 to gnd

Pin 86 to 12v

Pin 85 to viper horn wire

Pin 30 to car horn wire

Quenching diode across pins 85 and 86 on relay band side toward 86. I use 1N4005 diodes

If i Can't Install it I Don't need it Joe

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

avital 5303 horn

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.