bypass immobilizer stopped working

Home / the12volt's Install Bay / Car Security and Convenience / bypass immobilizer stopped working (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

durf23112

Member - Posts: 21

Joined: December 28, 2014

Location: Virginia, United States

Posted: January 11, 2015 at 4:34 PM / IP Logged

viper remote 5301 in place and working . Installed iDatalink ADS-ALCA. programmed Bypass all was well. Wife's car. Worked fine for a week then won';t start. remote start works. IF put key in ignition remote start will start car. reset Bypass mulitple times still just cranks without starting. Help? What changed, am I missing something?

jf durf

chev104275

Gold - Posts: 1,428

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: January 11, 2015 at 5:22 PM / IP Logged

Have you checked your connections ? Was everything soldered at time of install ?

I have yet to have a idata piece go bad

If i Can't Install it I Don't need it Joe

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bypass immobilizer stopped working

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.