Viper 5906 and DBALL2

Home / the12volt's Install Bay / Car Security and Convenience / Viper 5906 and DBALL2

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

pcguy760

Copper - Posts: 154

Joined: August 20, 2005

Location: United States

Posted: December 25, 2015 at 7:59 PM / IP Logged

Vehicle is a 2009 Escalade Base Model. I am going to install a Viper 5906 and was told its best I get the DBALL2 (which I did). Its been a loooong time since I did an install and let me know if I am wrong - it appears that the DBALL2 connects to the 5906 Alarm Module and interacts with it and then talks to the vehicle's computer to do everything a standalone alarm would do such as doors, remote start, etc. etc. Am I on the right path here?

Been an installer for over 15 years and out of it for a long time. Boy have things changed!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.