Viper 4203v Antenna

Home / the12volt's Install Bay / Car Security and Convenience / Viper 4203v Antenna

Welcome Guest :)

Members

< Prev Topic Next Topic >

xjbmx

Member - Posts: 2

Joined: January 03, 2016

Location: Georgia, United States

Posted: January 03, 2016 at 2:54 PM / IP Logged

I was installing my viper responder one 4203v and the remote start was working good and i was happy. The day after it just stopped working and the led on the brain box no longer comes on at all. I have checked all my connections and I have a good solid ground. I did however find one of the antenna wires had broken off at the connector. Can a broke antenna wire cause the whole brain box to not power up and flash its led? (I swapped in a known good brain box and it didnt fix the problem.) Any help is greatly appreciated.

xjbmx

Member - Posts: 2

Joined: January 03, 2016

Location: Georgia, United States

Posted: January 03, 2016 at 2:56 PM / IP Logged

Just to be clear the LED does not come on at all. Even if you unplug it and plug it back in or push the momentary switch to do into diagnostic mode.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.