Compustar CM-7200 and 2010 F150

Home / the12volt's Install Bay / Car Security and Convenience / Compustar CM-7200 and 2010 F150

Welcome Guest :)

Members

< Prev Topic Next Topic >

pondskipper

Member - Posts: 1

Joined: January 16, 2016

Posted: January 16, 2016 at 5:24 PM / IP Logged

Can anyone tell me if the CM-7200 has a programmable disarm input? I have the CM-7200 with the remote start and alarm hooked up with a Drone system also.

I am wanting to use the keypad on the outside of the door to disarm the alarm when the code is entered correctly. Right now it sets off the alarm when opening the door.

Would PIN12 BROWN / White (PIC3) Key Sense INPUT (-) work to shut off the Compustar alarm? I realize I could do this sending a pulse from the door lock switch (-) to an alarm trigger input. If the Compustar has one.

I'm not worried about the fact that someone could shut the alarm off once in the vehicle, because as soon as the alarm has been triggered - the Drone has already sent the signal to my phone and I will get the message even if the alarm is disarmed from inside.

Also - what wire would I connect the PIN 11 Orange to to make the domelights light up when the door locks are unlocked/ alarm disarmed?

Thanks.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.