scion tc immobilizer bypass for custom swap

Home / the12volt's Install Bay / Car Security and Convenience / scion tc immobilizer bypass for custom swap

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

pseudokirby

Member - Posts: 5

Joined: March 11, 2012

Location: California, United States

Posted: March 21, 2016 at 11:41 AM / IP Logged

I have a 1991 Toyota MR2 that I have put a 2008 scion tc 2.4 engine in, before I started this I did some research and looked up and bought what was supposed to be a non immobilized ECU.

fast forward to today the car isnt firing, fuel is running to the rails but the spark plugs are dry.

apparently immobilizer shuts off injectors and coil packs.

does anyone know of any aftermarket security that I can use to tell the ECU to stop looking for an immobilizer, or if its possible to flash out the immobilizer in the ECU?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.