Remote Start Cranks but doesn't start

Home / the12volt's Install Bay / Car Security and Convenience / Remote Start Cranks but doesn't start

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

beedix

Member - Posts: 24

Joined: December 21, 2011

Posted: May 10, 2016 at 1:05 PM / IP Logged

Background: Had a lot of battery issues and finally got it resolved with a new alternator (08 Honda Accord).

Remote Start has worked reliably for 5 or more years until recently. When I remote start the car, I get a few seconds of cranking and then it stops. I notice I get a green key symbol on the dash that illuminates during the start attempt. If i start over and put the key in the ignition and then remote start, it starts just fine.

Is it possible the DBALL2 has been reset somehow? Or where would I look to troubleshoot further?

Back to Top

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: May 10, 2016 at 3:04 PM / IP Logged

Porbably have to have the DBALL2 reprogrammed. Whatever steps needed to program the key(s) to the DBALL2

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Back to Top

beedix

Member - Posts: 24

Joined: December 21, 2011

Posted: May 10, 2016 at 3:13 PM / IP Logged

Ok, Thanks. Unfortunately, I forgot where I mounted the DBALL. Should be fun...

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.