2013 CRV with Prestige APS57E and FLCAN
I was wondering if I got the 2nd ignition wire mapped correctly. APS57E has a 2nd ignition wire but the CRV only have one from the Ignition harness.
Can I connect it to Accessory 2 and change bank 3 Feature 7 to be the Same as ACC? I noticed EVO All didn't even connect the 2nd ignition wire with their install. Here are my wire connections below, hopefully everything else is correct.
14-PIN Main Harness
1 GREEN/ ORANGE Tachometer Input >>> D2D, maybe hardwire
2 GREEN/ YELLOW Glow Plug Input >>> NC
3 DK BLUE (-) Channel 3 Trunk Release Output >>> D2D
4 BROWN / BLACK (+) Inhibit/Shutdown To Brake Switch >>> D2D
5 BROWN (+) Inhibit/Shutdown >>> NC
6 GRAY (-) Inhibit Neutral Start Switch >>> NC
7 NA
8 BLACK / YELLOW (-) Pulse During Crank Output >>> NC
9 BLACK/ RED (-) Pulse After Shut Down Output >>> NC
10 BLACK/ BLUE (-) Pulse Before Start Output >>> NC
11 BLACK/ LT GREEN (-) After Start Output >>> NC
12 LT BLUE (-) Ground While Running Output >>> D2D
13 GRAY/BLACK (-) Inhibit/Shutdown To Hood Switch >>> D2D or Hood Pin
14 BLACK/ WHITE (-) Horn Output >>> (-) ORANGE Steering colum PIN2
4-PIN 2nd Main Harness
1 BLACK Chassis Ground >>> chassis ground
2 WHITE/ RED Parking Light Input >>> chassis ground
3 YELLOW/BLACK To Controlling Alarm's Ignition Input >>> NC
4 WHITE (-) Parking Light Output >>> (-) LT BLUE Light switch, PIN8
6-PIN Power/Start Harness
1 Blue (+) Ignition 1 >>> (+) RED Ignition 1, Ignition harness PIN2
2 RED / White (+) 12VDC >>> (+) WHITE +12V, Ignition harness PIN1
3 Green (+) Ignition 2 >>> (+) YELLOW ACC2** (bank 3 Feature 7 Same as ACC, Ignition harness PIN3
4 Purple (+) Accessory >>> (+) BLUE Accessory1 Ignition harness PIN4
5 Red (+) 12VDC >>> (+) WHITE +12V, Ignition harness PIN1
6 Yellow Starter >>> (+) GREEN Starter, Ignition harness PIN5
2-PIN Door Harness
1 RED (-) Door Lock Output >>> D2D
2 GREEN (-) Door Unlock Output >>> D2D
FLCAN
Can High BROWN / RED >>> PINK Can High, Immobilize Harness PIN4
Can Low BROWN / YELLOW >>> BLUE Can Low, Immobilize Harness PIN3
Key Data ORANGE / BLACK >>> YELLOW Data, Immobilize Harness PIN6
Ignition WHITE/ BLACK >>> DK BLUE Ignition Connector Side CUT WIRE, Immobilize Harness PIN2
Ignition WHITE/ RED >>> DK BLUE Ignition Car Side CUT WIRE, Immobilize Harness PIN2
Ignition PINK >>> DK BLUE Ignition Car Side CUT WIRE, Immobilize Harness PIN2