+ 12v constant fuse size on viper install

Home / the12volt's Install Bay / Car Security and Convenience / + 12v constant fuse size on viper install

Welcome Guest :)

Members

< Prev Topic Next Topic >

objecttothis

Member - Posts: 19

Joined: October 09, 2016

Posted: November 10, 2016 at 2:19 PM / IP Logged

Car: 1998 Lada Niva 2131

Alarm: DEI Viper 3105v with 507m, 506t and 522t

For the 522T (Trunk release), domelight supervision and door actuators I am needing to drive those with relays. The install manual says that the (+) 12v constant pin on the relay should be fused but fails to list the amp rating for the fuse I should select. What size fuses are appropriate for each of these relays? For the domelights they are led and draw a total of 18w so thats rated 1.5A. Should I then just throw a 2A or 3A fuse or take a different approach? The 522T has a fuse on the button side (10A rated) so should I just mimic that? As for the 4 door actuators I have no idea how many amps they pull. Safe guesses?

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.