2016 Ford F150 Using Dball bypass

Home / the12volt's Install Bay / Car Security and Convenience / 2016 Ford F150 Using Dball bypass

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

507 w

Member - Posts: 19

Joined: November 21, 2011

Location: Nebraska, United States

Posted: December 30, 2016 at 6:01 AM / IP Logged

I'm installing a remote starter on a F150 2016 with oem remote starter. There is an issue during the programming the Dball. The dball blink red twice and keeps repeating. When I turn the key off, it started blinking orange. I triple checked allthe Can-wires and they are as instructed in the installation manual. Thanks in advance for the help.

The Broken Link

Back to Top

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: December 30, 2016 at 6:23 AM / IP Logged

Is the DBALL flashed correctly?

Trouble shooting section, Page 16

Flashing Red x2 Can 1 not detected.

Flashes Orange, 1 of 2 CAN has been detected.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Back to Top

507 w

Member - Posts: 19

Joined: November 21, 2011

Location: Nebraska, United States

Posted: December 31, 2016 at 1:23 AM / IP Logged

Thank you! It did not flashed correctly. I did not select oem remote starter in the configuration.

Thank You very much

The Broken Link

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.